- Double shell of mild steel construction
- Fully automatic operation with dust proof pre wired control panel
- Helical Coil type Multi Pass, once through, forced circulation Principal to use heat Transfer fluid without risk of chemical degradation
- Fuel atomizing pressure jet imported burner is placed vertically downward for combustion
- Dearator tank with Level switch and PRV
Features:
- Low running cost as compared to electric Heating
- No corrosion of scale – formation.
- Temperature up to 300°C, accuracy of± 1%
- Low working pressure of 2.5 Kg/Cm
- Fully automatic, Safe & Economical
- Pollution free
- No registered Boiler attendant required
- Electrical, Mechanical & Safeties
- Low stack temp, on full load.
- Efficiency upto 87%±2%
Technical Specification:
Details | Unit | SS-50 | SS-100 | SS-200 | SS-400 | SS-600 | SS-1000 |
---|---|---|---|---|---|---|---|
Heat Output | Kcal/Hr | 50.000 | 1.00.000 | 2.00.000 | 4.00.000 | 6.00.000 | 10.00.000 |
Outlet Temperature(max) | ℃ | 300 | 300 | 300 | 300 | 300 | 300 |
L.D.O. | Kg/hr | 5.7 - | 11.4 - | 22.8 - | 45.6 47.8 | 57.0 71.8 | 102.6 |
Fuel Consumption F.O. | Kg/hr | 119.6 | |||||
Thermal Efficiency | % | 87 | 87 | 87 | 87 | 87 | 87 |
Thermic Fluid pump Motor | H.P. | 2.0 | 3.0 | 7.5 | 10.0 | 12.5 | 25.0 |
Blower Motor | H.P. | 1.0 | 1.0 | 1.0 | 2.0 | 3.0 | 5.0 |
Thermic Fluid Pump Rating | Ltr/hr | 6.000 | 12.000 | 18.000 | 30.000 | 36.000 | 45.000 |
Fuel Oil Pre-Heater (For F.O.) | K.W. | - | - | - | 3 | 6 | 9 |
Burner Control | ON-OFF | ON-OFF | ON-OFF | ON-OFF | ON-OFF | LOW-HIGH | |
Total Connected Electrical Load | H.P. | 3 | 4 | 8.5 | 12 | 15.5 | 30 |
Expansion Tank Capa. | Liters | 150 | 150 | 150 | 150 | 400 | 400 |